The latest firmware from Maygion brings various improvements and a special attention to non-IE users.

The Maygion H264 IP Camera is a very open device with great customization potential.
This article contains some examples of hacks that enable telnet, load an alternate ftp daemon, extract
information, etc...
If keeping the camera under guarantee is no longer a concern for you, please read on... (-:

This latest firmware from Maygion is mostly a security update in reaction to vulnerabilities documented by
coresecurity.com last month.

Since the first release of the Maygion H.264 IP Camera in 2012, there's been a lot of progress made both on the software and the hardware side.

While the price didn't change, the value has increased...

For once, this update was not published by Cybernova but directly posted on MayGion web site.
It brings further improvements to the ONVIF compatibility with special attention to Synology DSM 4.2.

The current ONVIF implementation in Dericam H502W/Cybernova WIP604MW IP Cameras does not allow High Resolution and Pan & Tilt control in Synology Surveillance Station.

This method initialy published on the Polish web site, webcam4.eu, will  bring some improvement on that regard.

This official 05.39 update from CyberNova is a first step to bring the ONVIF compliance to the WIP604MW, well...sort of...

This article applies to Dericam H502W, Cybernova WIP604MW and compatible models.
Although they're hard to brick, some operations may sometimes produce similar symptoms.

This update is not from CyberNova, neither from Dericam (who didn't publish any firmware for the H502W yet), but has been successfully tested on my WIP604MW.
It brings a few interesting changes actually...

A common problem seen in Dericam H502W and Cybernova WIP604MW is the LED turning on and off continuously at times. In my initial review, I suggested that isolating the light sensor with a tube of black tape would help. There's now also an updated version of the LED ring that does just that.

And yet another firmware from CyberNova. The version 05.20 brings a user interface localized in French.

I decided to replace my older IP cameras with some of the newer mega pixel models available. One is the CVLM-I234-2GEN (aka CN-WIP604MW), and the other, the Tenvis IPRobot3. Both are supposed to have identical  specifications.